The SNIPEX JOVE 50 scope was specially developed to be used with large-caliber weapons. It fully meets the requirements for optical devices for long-range rifles.
Withstands horizontal loads up to 1200G (along the axis), and vertical - up to 600G (perpendicular to the axis)
The scope transmits more than 95% of light with the least image distortion. It has an extremely low level of scattering.
The lenses are fully multi-coated. To protect the glass from fogging, the scope is filled with inert gas.
The adjustment drums are open. The elevation adjustment drum allows for rough and precise adjustment. The scope has a wide elevation range — 50 mil (172 MOA). The windage range equals 12 mil (41 MOA).
The sight can be equipped with the SNIPEX PHANTOM SP59 anti-laser attachment that reliably protects the observer’s eyes from hazardous laser radiation.
The body is made in the form of a monotube. The landing ring diameter equals 42 mm.
For mounting on the Picatinny rail, the scope is equipped with a branded quick-release monoblock, which is drilled in a single run to ensure a better fit of the scope.
Elevation adjustment drum
The step of one click during rough elevation adjustment corresponds to 1 mil, and during precise adjustment — 0.1 mil.
Windage adjustment drum
The step of one click during windage adjustment equals 0.1 mil.
The reticle is located in the first focal plane. The figure shows the central part of the reticle.
SNIPEX PHANTOM SP59
Anti-laser attachment. Reliably protects eyes from laser radiation.
SNIPEX monoblock mount
|Total length475 mm|
|Outer diameter of the objective71 mm|
|Scope tube diameter42 mm|
|Outer diameter of the eyepiece56 mm|
|Exit pupil diameter6× : 10.0 mm
24× : 2.5 mm
|Field of view at 100 m6× : 4.05 m
24× : 1.03 m
|Eye relief110 mm|
|Parallax adjustmentfrom 50 m|
|Elevation click value, rough adjustment1 MIL Zero Stop|
|Elevation click value, precise adjustment0.1 MIL Zero Stop|
|Windage click value0.1 MIL Zero Stop|
|Elevation adjustment range50 MIL|
|Windage adjustment range12 MIL|