SNIPEX

SNIPEX M100 is a single-shot large-caliber rifle with automatic case ejection.

Caliber: .50 BMG (12.7×99) / 12.7×108.

Developed for hitting moving and non-moving targets, including at long distances (up to 2,200 m).

The rifle has the bullpup design, i.e., the bolt carrier group is located behind the trigger.

The barrel is fully open, has 8 right grooves with a 15-inch twist as well as cannelures. Equipped with a muzzle brake. The barrel quality provides shooting accuracy of at least 1 MOA. For 12.7×108 caliber rounds, maximum accuracy is achieved if they are specially selected by weight.

Barrel locking is achieved through a rotating bolt. 13 bolt lugs are disposed in three rows and can rotate by 60 degrees, which ensures rigid locking of the barrel. The case ejection process is slightly delayed, which allows the bullet to leave the barrel with the bolt still fully closed. This transfers the maximum amount of energy to the bullet. Empty cases are ejected automatically when pulling the bolt back. The bolt design is patented.

The bolt has a special flag indicator that allows controlling the degree of bolt locking. If the bolt is open, the flag is recessed into the body; if the bolt is closed, the flag protrudes parallel to the body. Has light indication for use in the dark.

Light trigger. The rifle is equipped with a special grip safety, which is located directly above the pistol grip on both sides of the weapon.

One of the main advantages of SNIPEX M100 among large-caliber rifles is MAXIMUM COMFORT SHOOTING.

During the creation of the rifle, a whole set of special design decisions was implemented regarding the reduction of recoil and the increase of shooting accuracy. Recoil reduction is achieved due to the inertia recoil system, which includes spring-loaded assemblies, hydraulic (optional) or spring shock absorbers. The shock absorbers are built into the upper receiver, which allows shooting with the upper receiver set against a surface. Recoil energy is partially reduced due to the muzzle brake.

The rifle is equipped with a SNIPEX bipod, which is easy to fold. It is designed so that the rifle is elevated on the bipod (the barrel axis is located below the mounting points of the bipod).

It is also possible to install a third-party bipod (with mounting on the bottom Picatinny rail). However, it is recommended to use the SNIPEX bipod, which provides additional stability and accuracy during shooting.

The specially designed additional rear support provides for the possibility of rough (ratchet rack) and precise (screw) adjustment.

The rifle has two Picatinny rails. The top rail with a 35 MOA gradient is located along the entire upper receiver length.

The rifle can be optionally equipped with a special handle for comfortable transportation.

The cheek rest, butt plate, and all handles of the rifle are made of modern wear-resistant polymer materials.

The surface of the rifle is covered with a special Сerakote weapon paint.

The rifle is easy to disassemble and maintain.